Monday, April 30, 2012

Hair Salon Advertisements

 What's The Message?
One of the first things that any hair salon advert should do is carry some message. For example, if you are planning to run a extra to growth customer counts by offering 25 percent off perms, then this is the message that you want the advertisement to convey. You do not all the time have to offer a allowance price, though, to have productive hair salon adverts. For example, maybe you would like to advise the communal of a new aid you are offering. That message should be clearly defined in your advertisement.

Who Are You?
The next leading thing that you hair salon adverts need to do is to supply information about your company. A good way to do this is with a unique enterprise logo. The benefit of having a logo is that you gain enterprise recognition for your business. When you think of large clubs such as Nike or Disney, you likely think of that unique check mark or the Disney castle. When your enterprise has a good logo, it becomes fresh in the mind of clients when they think of having their hair done. You may also want your hair salon adverts to show off your expertise. For example, many advertisements will say "In enterprise since 1982" or something similar. This shows contact in a straightforward productive way. You can carry these messages of who you are in any advertisement that you display.

Refrigerator Door Seals

Taking Action
Perhaps one of the best tools that you will use in your hair salon adverts is a tool that causes them to take action. For example, if you are having a allowance sale on hair care products you sell in your salon, a straightforward way to motivate the client to come in is a sale end date. "Hurry, while supplies last" also works well for many sales. Taking performance does not only have to do with a sale though. Provide the client with a naturally way to get in touch with you, through a website address that is catchy or through an easy to remember phone number. This opens the door for opportunities.

Hair salon adverts can be complex to create on your own. When beginning out, you may be tempted to generate and use these on your own. While that may save you money, it may cost you more in the long run when you do not bring in the draw of customers that you would like to. Determine if hiring a expert to create and market your hair salon adverts is a good choice.

By Greg Milner

 
Free Salon & Spa marketing Dvd - watch this Dvd and eye how to cram your salon or spa with clients eager to give you their cash. 

Hair Salon Advertisements

glass door refrigerator french four door refrigerator Cloud b Twilight Constellation Night Light, Sea Turtle

Saturday, April 28, 2012

Marble Vs Granite Countertops - Which is Better?

Many citizen want to know if marble or granite is better for countertops in their kitchens and bathrooms. After all, both are beautiful materials, both lend beauty and elegance to any home, and both are ready in many varieties to suit any preference.

On the other hand, there are a few differences in the middle of these two stones that you should seriously think before choosing in the middle of them. Rather than making this decision for you, why don't we let the facts speak for themselves.

Refrigerator Door Seals

The Pros and Cons of Marble

First of all, Marble is a metamorphic rock. Its basic ingredient can be found everywhere from limestone to baking soda, from

calcium carbonate to lime (white wash). The basic ingredient goes by many other names depending on its application and its form. Limestone, a sedimentary form of calcium, which is found naturally in the earth, undergoes intense heat and pressure within the earth to be formed into what we know as marble.

This rock can also be exposed to heat and milling to become a filler ingredient for medications, writing paper, plaster of

Paris, lime (white wash), and cement hardener. This means that marble, although beautiful and durable, is porous and very indubitably destroyed by any type of acid, heat, or water. Even with a seal coating applied religiously every year, no types of chemicals may be used to wash the countertops made from it. It cannot take much abuse from water, acids such as lemon or orange juice, or high heat from pans. These will all destroy the seal coating and the marble beneath.

Since marble is so porous, it is also indubitably stained. One single scratch can allow liquids or even oxidation from the air to

leak under the seal coating and stain the marble. This doesn't mean that it should not be used. Marble is ideal for use in low traffic areas or for sculpting phenomenal art out of. But for the high traffic use of a kitchen countertop, a floor, or a bathroom countertop, marble just means high maintenance.

The Pros and Cons of Granite

Granite is also a metamorphic rock. It is a composite of quartz, silicon, feldspar, mica, and any other minerals. It too

is formed under high pressure and heat. It is also just as beautiful. It is not as porous as marble and is resistant to chemicals and acids. The proximity of quartz in granite provides the granite with a durableness and hardness unlike that of soft marble.

Granite is more stain resistant and wear resistant than marble. While it is not perfect, granite holds up far better in high traffic uses such as counter tops and flooring. With a proper seal coating on granite and with proper care, granite will last for many years without scratching, staining, chipping, or wearing away. If properly cared for, granite may not need to be resealed every year.

Granite can also be quarried locally. This means that, unlike marble, granite will not have to be shipped from South America or Europe. Granite can be quarried in Arizona, New Mexico, and some northern states. Granite is also easier to ship. Even if the granite you settle on comes from South Africa, China, Asia, or Europe, there is more granite available. This means it's easier to acquire and less high-priced to use.

Ultimately It's Up To You

Whether you pick granite or marble is up to you. When asked which one is better for the high traffic use of countertops, the respond should be clear, granite will naturally hold up better. When properly cared for under normal conditions, granite is easier to care for and is resistant to staining, chemicals, heat, and fracturing. Granite is ready in more colors and patterns and can be practice ordered for less than marble.

Marble Vs Granite Countertops - Which is Better?

2 door refrigerator

Wednesday, April 25, 2012

Silestone vs. Granite Countertops - The Real Story

So you want to upgrade your kitchen or bathroom with a new countertop, but you're not sure what your options are. Chances are you've heard of granite and marble. After all, they have been used for myriad building purposes for centuries and you always see marble and granite countertops in luxury homes.

But what about Silestone...isn't it great than granite?

Refrigerator Door Seals

Well, it depends on what you think is better. However, Silestone and other makers of engineered quartz stone countertops, such as Zodiaq and Cambria would have you believe their goods is a valuable upgrade from granite.

Engineered stone countertops are a artificial goods that mixes quartz found in granite with a resin to make a face with properties approximately same to granite. Silestone and all the other companies make essentially the same product, which is widely regarded as an excellent countertop surface.

However, these companies try to make mountains out of molehills in an attempt to sell their goods and compete against granite which is and has bee the most popular and proven face type.

Myth #1: Sealing granite is a horrible, dirty chore.

This issue has been blown way out of proportion with marketing. It's always listed as a benefit and one would get the impression that granite is defective and must be sealed with over and over to safe it.

True, you don't have to apply a granite sealer to an engineered stone counter top. And hey, that's great, but applying a granite sealer is indubitably a very easy and infrequent "wipe on, wipe off" procedure. It is not a major chore and for all practical purposes it isn't a determining factor when comparing Silestone vs. Granite.

Also, it doesn't take a closet full of special chemicals to safe your granite and keep its luster as Cambria and other engineered stone counter top manufacturers recommend on their websites. Hey, to their credit they are just trying to effectively store their product.

A microscopic private about most granite . . .

You could do nothing but wipe it with a toady for years and it would still look gorgeous. Minor, easy maintenance performed periodically will, however, give you peace of mind and bring out the best in your granite and natural stone. And the same can be said about quartz. Care and cleaning is equally easy for whether surface.

Myth #2: Again with the sealing.

You may also read that you must seal granite to maintain it's shiny polish. Not true. Sealing is for stain resistance. Both natural and artificial stone counter tops are polished by grinding and buffing the face into a smooth shine.

Myth #3: Granite harbors bacteria.

Silestone also tries to claim their goods resists bacteria while granite "harbors" bacteria. This is totally false. Studies prove that both granite and quartz are among the safest and cleanest surfaces on the store today, but one isn't classic to the other.

So Which Countertop Is Best?

Well, once you remove the hype and you understand that artificial quartz countertops and granite accomplish equally well and that the care and cleaning of each face is essentially the same, the decision between granite and Silestone, Cambria, Zodiaq or other quartz counter tops normally comes down to color, pattern and perceived value for most buyers.

Color and Value

Granite enjoys a greater "prestige" due to it's natural uniqueness and is therefore, of greater value in the minds of most homeowners and buyers. New granites come on the store all the time from dissimilar countries providing hundreds and maybe thousands of dissimilar colors and patterns to select from.

Silestone and other engineered stone manufacturers offer 20-50 color choices all of which have basically the same repetitive pebbled appearance. The benefit here is that you never have a problem matching a pattern or color at a seam, which sometimes is a problem with granite. Of course, you may end up with the exact same countertop as your neighbor, which won't happen with granite as each slab is unique.

So, whether you select engineered stone or granite you will get an excellent countertop surface. Just don't listen to all the marketing hype and pick your goods based on what color and pattern you like best.

Silestone vs. Granite Countertops - The Real Story

refrigerator door replacement

Monday, April 23, 2012

Affordable renovation With Countertop Resurfacing

Let's face it; remodeling a kitchen can be an high-priced prospect. From appliances and paint to floors and countertops, transforming a kitchen wholly can want quite a bit of money and time. For most of us, tackling the entire scheme at once is naturally cost-prohibitive. But there are ways to visually transform your kitchen space without breaking the bank. The riposte lies in creative solutions to kitchen renovation; and one such idea is that of countertop resurfacing.

There should be no underestimating countertops in their quality to set the tone in a kitchen. Because they cover the space that they do - and because are often the focal point of the kitchen - they dramatically change the style of an area. Changing the countertop will allow you to carry straight through with the produce you desire and visually impact the space with just one renovation.

Refrigerator Door Seals

But as dramatic as they are, countertops can also be expensive. And sometimes, changing them wholly is not within a accepted budget. Luckily there are ways to transform the countertops without having to change them completely; countertop resurfacing is an affordable and easy way to change the look of your kitchen without the mess and charge of replacing the materials completely.

Luckily, most kitchen countertops come in a accepted size; this can be a major benefit when it comes to countertop resurfacing as laminate material often comes ready to buy at the accepted sizes of most countertops. Today's laminates come in an whole option of colors, styles, and textures and because they are mass-produced, they are often extremely affordable.

Laminate material is only about one sixteenth of an inch thick and, therefore, can be handled quite easily. But before you cleave the new laminate to the existing countertop you need first to get ready the countertop itself. Begin by removing the countertop and stripping it of its laminate and glue. This can be done with chemical solutions available at home revision stores. Once the glue and laminate is removed the exposed wood needs to be sanded flat in order to create a pliable exterior for easy adherence.

Once your exterior is ready you can spread the glue for your new laminate. Again, this definite glue can be purchased at a home revision store. The most leading part of this process is to make sure that the glue is spread thinly and evenly over the entire surface. Uneven glue distribution can ensue in bubbling of the laminate and an uneven countertop surface.

A glue spreader can support you in production this layer of glue as even as possible. Be sure that the glue reaches the edge of the countertop in order to accomplish a proper seal of the laminate to the edges. The edges are primary to countertop resurfacing as edges that are not properly glued down can fold or come loose, exposing the laminate to moisture and subsequent damage.

A heavy roller can be used to roll over the laminate to ensure even adherence of the counter top and glue. Some glue seeping out of the edges is to be expected, and can assuredly be wiped off before it dries.

Affordable renovation With Countertop Resurfacing

tablet pc comment and reviews best tablet pc os and future

Wednesday, April 4, 2012

security Features of Appliances

Whether it is electrical or electronic, all appliances come with cutting edge inbuilt security standards. security features differ from one brand to another, but approximately all brands ensue unavoidable normal security measures. This includes low resistance earth, to safe the user from getting a shock from electricity. Those electrical appliances without earth will have double insulation to avoid electrical shocks. Appliances like toasters, kettles and hair dryers come with different types of switch technologies that detect any fault in the appliances and cut the power contribute automatically. Beloved brands such as Electrolux and Whirlpool come with different type of child security features. There are security features that include dryers that have a latch on the inside door that safe children from being locked inside, and some ovens are adequate with locks on the face of the door to forestall children from occasion a lit oven.

In spite of all the security built in features, one has to be cautious when using appliances. Never touch metal or stand in water while using electrical appliances. Check cords, outlets and switches of the appliances at quarterly intervals. Always turn off the electrical appliances and unplug them when not in use. Some of the most commonly used gas appliances are gas grills, fireplaces, vent free and vented gas logs, lights and more. All gas appliances must be kept in a properly ventilated space. The cooking face of any gas must be keep free of dust and dirt to forestall hazardous clogging.

Refrigerator Door Seals

Though habitancy are aware of all these security features, they do not pay much attention. The U.S. Consumer goods security Commission (Cpsc) has estimated that each year more than a thousand habitancy get injured by electrical or gas appliances. This is in general caused because habitancy overlook security features.

It is recommended to check for the Underwriters Laboratories (Ul) seal of approval before purchasing any appliance. This is a confirmation that the appliances are tested for safety.

security Features of Appliances

bottom freezer fridge 4 door french door refrigerator

Monday, April 2, 2012

How to setup Your Own Kitchen - Part 6 - Installing Kitchen Appliances

Installing Kitchen Appliances

Appliances
If installing a kitchen was like construction a car then it's time to fit the engine, in this case the appliances. Kitchens, like cars, depend upon the capability of the appliances to give a more efficient performance. There is a wide range of appliances now available and they can range from Reliant Robin to Rolls Royce in their comparative looks and performance. The current trend is for aluminum or stainless steel finishes and due to their popularity they are more expensive.

Refrigerator Door Seals

Some appliances are fitter friendly, others not. Some manufacturers offer a good assistance back up if things go wrong, others don't and some may last for years others, months. After 23 years of installing appliances, I have formed an experienced opinion on what's hot and what's not in the kitchen. Whatever wishing to hear of my views before buying a singular make can register and post a query in our forum and I will offer an honest opinion on your choice.

Anyway, every car needs a parking space so in this narrative I'll effort to show you how to setup your appliances with the minimum of fuss.

Tools required:
Spirit level
Hand tools. Screwdrivers both pozidrive and slotted heads of varying sizes, pliers and grips.
Cordless drill/driver Masonry, screwdriver, and steel drill bits of various widths.
Plumbing tools.
Patience, understanding and the capability to deflect annotation successfully.
Freestanding Washing Machines/Dishwashers.
The majority of washing machines are 595mm wide and the prominent thing to remember is that freestanding machines are commonly in the middle of 840mm and 860mm high. prominent because when installing your kitchen units at the thorough height of 870mm, this can leave very limited tolerance for fitting when flooring has been added. A 600mm, or 450mm, in the case of slim-line dishwashers, space is enough and will ensure a more fully fitted look.

For definite fitting of a washing machine, all plumbing services should be fitted in an adjacent cupboard to prevent the engine protruding from the worktop. A washing engine waste of 40mm diameter can be fitted within the void of an adjacent cupboard and again this will prevent the engine protruding from the worktop.

If fitted next to a sink unit, the waste from the appliance may be incorporated with that of the sink. However should the washing engine and dishwasher be sited whether side of the sink, I recommend that you setup a cut off waste pipe. Three appliances entering one waste pipe will render the waste very prone to blockages.

Electrical services should also be fitted in an adjoining unit and thorough sized holes for hoses and plugs must be drilled straight through the back or base of the cupboard. This can be achieved with an appropriately sized hole saw.

Flooring for all freestanding appliances should be installed prior to final fitting. After completing the above, slide the washing engine into place and make valuable adjustments to the feet for leveling purposes.

Built under freestanding fridges/freezers.
Installation of built under fridges/freezers is carried out much the same as above yet they vary in widths. Adding 5mm to the width of the appliance will leave enough space for fitting.

Freestanding machines may be fully integrated by the use of a deeper worktop and by expanding the width of the space and doors that will house them.
Before explaining the premise of cookers and hobs, I must stress that to work on any gas appliance, a person must be competent to do so.

Built in Ovens/Microwaves.
Whether the oven is a singular or double oven ensure the cabinet gap ,break is the definite size for the appliance as heights can vary. Check the electrical rating of the appliance and fit the thorough sized outlet, again avoiding the space directly behind the appliance. Once you've fed the appliance flex to the outlet, this may be in adjacent cupboard or in the case of a double oven, in the cupboard above, slide in the appliance and screw to the cabinet gables with the screws provided.

Splash back
It may be that you wish to setup a splash back with your range cooker and to fit one correctly you must conclude the concluded height of your worktop. The suspect for this being, that your extractor should be fitted prior to fitting the cooker and splash back fixings are positioned behind the position of the extractor. Installing this before fitting the cooker will prevent any damage to the appliance and ensure that you have enough space to work.

Range cookers
Preparation for the fitting of Range Cookers is similar to that of a freestanding appliance in that the space in the middle of cupboards needs to be definite and I would suggest, 5mm wider than the appliance. The electrical connection, as with all appliances, should be made straight through an adjacent cupboard for entrance purposes.

Great point should be given to the concluded height of the appliance and the top edge of the cooker should desist at least 5mm above the worktop. Although not regulatory, I protect adjacent worktop edges with metal edging strips and these are available at major Diy outlets.
Should the appliance legs offer insufficient height adjustment, the appliance must be raised on a platform. This platform can then be concluded in a material of your selection to match the appliance or the kitchen.

Integrated Dishwasher/Washing Machine
Integrated Dishwashers are available in slim line, generally 450mm width, and standard, 600mm wide sizes. The size of the dishwasher matches the gap ,break you will need to leave to accommodate the appliance, no more, no less. The only room for accommodating crossing pipe work or services behind integrated dishwashers is within the recess at the bottom of the machine. This is an prominent point to remember as to setup services elsewhere behind the appliance will succeed in the dishwasher protruding from the adjacent cabinets and unless you wish to start a new create trend, this is to be avoided.

Doors are fitted to the appliance door by means of fixings in case,granted with each engine a template assists in marking the thorough points. The nature of the way a dishwasher door opens, warrants that the kitchen kickboard be cut almost 10mm directly beneath the appliance in order to accommodate the door on opening.

Again, water and electrical services for both dishwashers and washing machines should desist in an adjacent cupboard and waste services must be fitted behind an adjacent unit, within the void. Should the appliance be sited next to a sink however, the waste can be integrated with the sinks waste outlet.

When positioning the appliance in readiness to connect, feed the water hoses and electrical flex behind the thorough rear unit leg. This will allow entrance to the services when the appliance is in place and will also permit fitting before the furniture plinth is installed.

The height of the appliance is made by means of adjustable feet and the rear feet can be accessed under the unit prior to fitting the plinth. Once you've achieved the definite level, screw to the underside of the worktop with the screws provided. Dishwashers want the fitting of a protective waterproof barricade and this should be fitted to the underside of the worktop once the appliance is in place.

Many integrated washing machines present a supplementary qoute for installers as they have no recess at the rear of the engine and the height adjustment is minimal. For this suspect it may be valuable to setup a platform ensuring that it does not protrude from the furniture plinth and no services should cross the rear wall behind the appliance as they will impede on the appliance hoses, thereby obstructing definite fitting.

Of all integrated appliances, integrated washing machines in my opinion are the least fitter cordial and want many improvements before they become so. The door is fitted to the appliance by means of side occasion hinges that allow limited adjustment and you may be required to drill the furniture door hinges to match adjacent door heights. There is limited room for error and measurements should be double checked before drilling.

Built Under Integrated Fridges/Freezers
Follow the same rules as for installing a dishwasher. Again there is no room for services directly behind unless at low level. Feet are fully height adjustable and fridges or freezers are screwed to the worktop straight through pre-drilled holes once fitted. For door fitting, succeed the instructions supplied with the appliance. These again, will come with a template and fixings. More manufacturers allow rear leg adjustment from the front of the appliance and this makes for simpler installation.

Built In Integrated Fridges/Freezers
Integrated built in appliances, unlike built-under appliances, are fitted within a furniture housing. Some manufacturers want the doors of the housing to be fitted to the cabinet prior to fitting the appliance but of recent; more rely on fitting the doors direct to the appliance after fitting.

Templates and fixings are in case,granted with the appliance and provision is made for fixing straight through the feet and the top of the appliance once leveling is complete. Ensure that the appliance is fitted to the definite depth for definite performance of both the cabinet and appliance doors.

Again it is a good rule to avoid services to the rear of the appliance. It may be valuable to adapt the cabinet prior to fitting your built in appliance as some cabinet manufacturers leave a back fitted to the appliance aperture. This will need to be removed to allow definite fitting of the appliance.

Appliances fitted within a housing want enough ventilation and this is achieved by fitting a ventilator to the plinth.
American Freestanding Fridge Freezers
These appliances are becoming increasingly beloved and want a cold water supply. They can be integrated to blend in with your kitchen by installing a top cupboard in the middle of two tall end panels. As with other appliances, services i.e. Water and electrical, should desist and be linked to the appliance via an adjacent cupboard. Should this not be possible, fit the services as close as possible to the rear wall. If you wish your fridge to lie flush with the adjacent cabinets you will want greater depth matching end panels and this will achieve the desired effect.

Built In Microwaves
Microwaves can be fitted within both wall units and appliance housings dependent on the model purchased. To do this will want a build-in kit in expanding the microwave. Electrical contribute again should be fitted to an adjacent cupboard or in the cupboard above or below the appliance.

Hobs - Gas and Electric
After cutting the thorough sized hole in your worktop and protecting the exposed chipboard, the hob needs fixing to the worktop. Apply the seal (provided with the appliance) to the worktop. Fix the hob on the underside with the fixing clips in case,granted and electrical or gas connections can now be made. Gas connections must be made by a competent person

When a hob is fitted above an oven, gas pipe work must be completed in such a way as not to impede the fitting of the appliance below. Electrical connection in the configuration described above, must be made in an adjacent and accessible unit unless the hob is fitted above a drawer or door unit.

Integrated Extractors
Having left the thorough gap and installed the wall outlet, if applicable, procure the brackets to the rear wall and hang the extractor. Remove the pivotal door-fixing frame and screw the appliance to the adjacent cabinets. Fit the door to the fixing frame using the screws provided. This is made easier by using a template if provided. Make the vent connection to the exhaust outlet of the appliance and make the electrical connection in the accessible yet inexpressive space at the rear top of the extractor.

Chimney Style Extractors
A beloved selection in modern kitchens is the chimney style extractor and it is imperative to ensure alignment and level for its installation. To achieve the definite finish, mark the centre line of the hob on the rear wall and continue this line up to the ceiling. Use this line as a reference point for fixing the flue brackets above the extractor. Ensure that the extractor is sited the definite and regulatory length above the hob and change the template measurements to the wall using the line as reference. All ventilation connections should be made behind the flue and may be possible above the ceiling dependent on the joist direction.

After installing the extractor and flue, place the telescopic two-part chimney on top of the appliance. Slide the chimney up to the ceiling and fix to the previously installed bracket. Electrical connection for chimney extractors should be made via a fused outlet in an accessible position above the worktop. The feed from this should desist behind the flue and connection to the extractor can be made via a junction box of thorough size.

Canopy Extractors
The cut-out for the extractor is best made prior to installing the canopy and electrical and flue connections should all be made within the canopy. Canopies fitted in the middle of units are easier installed by fixing a temporary batten over the top. Lift the canopy above the neighbouring units and moderately bring down to rest on them. This will ensure the unit will remain level with the adjoining units before fixing. Fixing of the furniture canopy can be made within the cut-out by drilling four holes to each gable and fixing with appropriately sized screws. setup the extractor into the cut out after manufacture electrical and flue connections.

Island Extractors
Before installing an island extractor, the ceiling to which it will be fitted may want extra timber fitted, in the middle of or adjacent to the existing joists. enough fixing is imperative to carry the weight of the appliance. When you have carefully the position of your extractor, the flue, if the joists allow, should be fed straight through to the nearest outside wall.

The fixing frame should be fitted to the ceiling with the screws supplied. The extractor will then want fitting. Final leveling using the adjustable bolts can now be done before tightening. Again, electrical connections can be made within the flue via a fused spur fitted to the wall above worktop height. Finally, the flue, which is in two parts, can be fitted and screwed to the frame with the fixings supplied.

Well apart from the toaster, blender and sandwich maker, I think that covers most appliances in the kitchen. All that's left once they're fitted is to cook, cool and wash in them. If like me, however, you're that cook that spoils the broth, stick to the washing.

next article: Kitchen Nightmares - how to avoid them

© Tim Foley 2009

How to setup Your Own Kitchen - Part 6 - Installing Kitchen Appliances

3 inch french door refrigerator